When dealing with a Ford P2229 Code, it is essential to understand the causes and solutions of the error to fix the problem. The Ford P2229 Code is a diagnostic trouble code (DTC) that indicates a Barometric Pressure Circuit High issue. This DTC is triggered when the barometric pressure (BARO) sensor signal is greater than the maximum threshold for greater than 500 ms. The BARO sensor is integral to the PCM, and when the DTC is present, the vehicle may be operating in derate mode, leading to a loss of power. To diagnose and fix the issue, it is essential to understand the causes and solutions of the Ford P2229 Code.
👀Look at this: Ford P073F Code
Causes and Solutions of Ford P2229 Code
| Cause | Solution |
|---|---|
| BARO circuit short to voltage | Replace the PCM |
| Damaged BARO sensor | Replace the BARO sensor |
| System warning message | Clear PCM DTCs and then repeat self-test |
| Intermittent Power Loss | Diagnose electrical system and repair as necessary |
BARO Circuit Short to Voltage
When the Ford P2229 Code is triggered, a BARO circuit short to voltage can cause the issue. In this case, the PCM must be replaced to fix the problem. The BARO sensor is an integral part of the PCM and when the DTC is present, the vehicle may be operating in derate mode, leading to a loss of power.
📢Read also: Ford P1248 Code
Damaged BARO Sensor
The BARO sensor can become damaged due to wear and tear or a defect. If the sensor is damaged, it must be replaced to fix the Ford P2229 Code. The sensor can become damaged due to low-quality fuel, impacts on the engine, or a defect in the manufacturing process.
🎯Suggested article: Ford C0040:64 Code
System Warning Message
If the system warning message is present, the PCM must be cleared, and the self-test must be repeated to fix the Ford P2229 Code. The system warning message can be caused by a malfunction in the PCM or a fault in the BARO sensor.
🚀Recommended article: Ford P2704 Code
Intermittent Power Loss
If the vehicle is experiencing intermittent power loss, the electrical system must be diagnosed and repaired as necessary. The power loss can be caused by a malfunction in the PCM or a fault in the BARO sensor.
📢Read also: Ford P0340 Code
Conclusion
The Ford P2229 Code is a diagnostic trouble code that indicates a Barometric Pressure Circuit High issue. To diagnose and fix the problem, it is essential to understand the causes and solutions of the Ford P2229 Code. These causes and solutions include a BARO circuit short to voltage, a damaged BARO sensor, a system warning message, and intermittent power loss. Understanding the causes and explanations of the Ford P2229 Code makes it possible to diagnose and fix the issue quickly and efficiently. In conclusion, the Ford P2229 Code can be set by understanding the causes and solutions of the problem.