Regarding the Dodge C211B-92 Code, it is important to understand the definition, description, causes, and solutions to the problem. The Dodge C211B-92 Code is an ignition run/start input circuit that has either a performance or incorrect operation issue. The code is caused by a variety of factors, including a faulty FUSE F48, a fused ignition switch output (run-start) circuit that is short to voltage, a fused ignition switch output (run-start) circuit that is open or high resistance, a ground circuit that is open or high resistance, and an Active Damping Control Module (ADCM). The failure type for this code is performance or incorrect operation, which means the control module has detected that the component performance is outside its expected range or operating in an incorrect way. To properly identify and fix this issue, it’s important to understand the root causes and remedies.
🚨You may be interested in: Dodge P1297 Code
Causes and Solutions for Dodge C211B-92 Code
Cause | Solution |
---|---|
Fuse F48 (20A) | Replace the faulty fuse. |
Fused ignition switch output (run-start) circuits short to voltage | Check the switch and its wiring for any problems. |
Fused ignition switch output (run-start) circuits open or high resistance | Inspect the wiring for damage and corrosion. |
Ground circuit open or high resistance | Look for loose or corroded ground connections. |
Active Damping Control Module (ADCM) | Replace or repair the ADCM if needed. |
Fuse F48 (20A)
The Fuse F48 (20A) is the most common cause of the Dodge C211B-92 Code. When this fuse is faulty, the circuit cannot provide the correct amount of current, resulting in a performance or incorrect operation issue. The faulty fuse should be replaced with a new one.
Fused Ignition Switch Output (Run-Start) Circuits
For the fused ignition switch output (run-start) circuits, it is important to check for any shorts to voltage, open, or high resistance circuits. If any of these issues are present, the wiring harness and the switch should be inspected for any problems.
🚨You may be interested in: Dodge P0642 Code
Ground Circuit
The ground circuit is also a common cause of the Dodge C211B-92 Code. The ground circuits must be checked for any loose or corroded ground connections. If any are found, they should be repaired or replaced as needed.
Active Damping Control Module (ADCM)
The last possible cause of the Dodge C211B-92 Code is the Active Damping Control Module (ADCM). If the ADCM is faulty, it must be replaced or repaired.
Conclusion
In conclusion, the Dodge C211B-92 Code is a performance or incorrect operation issue caused by a variety of factors, such as a faulty FUSE F48, a fused ignition switch output (run-start) circuit that is short to voltage, a fused ignition switch output (run-start) course that is open or high resistance, a ground circuit that is open or high resistance, and an Active Damping Control Module (ADCM). To properly identify and fix this issue, it’s important to understand the root causes and remedies. By taking the necessary steps to diagnose the Dodge C211B-92 Code and take the right action to fix it, you can avoid further damage to your vehicle.
📢Read also: Dodge B1C14 Code