Solution: Replace and repair the wiring harness. Replace the electronic throttle control. Replace ECM.
Regarding Subaru P0122 Code, it is essential to understand the causes and solutions that can help diagnose and repair the issue. This code relates to the Throttle/Pedal Position Sensor/Switch “A” Circuit Low, leading to improper idling, engine stalls, and poor driving performance. The cause behind this code can include a damaged wiring harness between the ECM and electronic throttle control, a defective electronic throttle control, or a defective ECM. Fortunately, solutions are available to address these causes, such as replacing and repairing the wiring harness, replacing the electronic throttle control, and replacing the ECM.
🎯Suggested article: Subaru P1540 Code
Causes and Solutions for Subaru P0122 Code
| Cause | Solution |
|---|---|
| The wiring harness between ECM and electronic throttle control needs repair | Replace and repair the wiring harness |
| Defective electronic throttle control | Replace the electronic throttle control |
| Defective ECM | Replace ECM |
| Throttle/Pedal Position Sensor/Switch “A” Circuit Low | Check battery voltage and throttle position sensor |
Damaged Wiring Harness
When it comes to a damaged wiring harness between the ECM and electronic throttle control, the best solution is to replace and repair it. This will ensure the electrical signals are correctly sent and received, so the ECM can accurately regulate the engine’s performance.
💥See also: Subaru P014D Code
Defective Electronic Throttle Control
If it is determined that the electronic throttle control is defective, then the best solution is to replace it. This will ensure the throttle is appropriately regulated and the engine can operate correctly.
Defective ECM
If the ECM is determined to be defective, then the best solution is to replace the ECM. This will ensure that the engine can operate correctly and that all electrical signals are appropriately sent and received.
🚨You may be interested in: Subaru P0172 Code
Throttle/Pedal Position Sensor/Switch “A” Circuit Low
If the cause of the Subaru P0122 Code is the Throttle/Pedal Position Sensor/Switch “A” Circuit is Low, then the best solution is to check the battery voltage and the throttle position sensor. This will ensure that the electrical signals are appropriately sent and received and that the engine can operate correctly.
Conclusion
When diagnosing and repairing Subaru P0122 Code, it is essential to understand the causes and solutions that can help. The cause of this code can include a damaged wiring harness between the ECM and electronic throttle control, a defective electronic throttle control, or a defective ECM. Fortunately, solutions are available to address these causes, such as replacing and repairing the wiring harness, replacing the electronic throttle control, and replacing the ECM. Additionally, if the reason for the code is the Throttle/Pedal Position Sensor/Switch “A” Circuit is Low, then the best solution is to check the battery voltage and the throttle position sensor. By taking the time to understand the causes and solutions for the Subaru P0122 Code, you can ensure that your vehicle is running at its optimal performance.