When dealing with a Mitsubishi P1400 Code, it is important to understand the definition of the code, as well as its causes and solutions. A Mitsubishi P1400 Code is defined as Manifold Differential Pressure Sensor Circuit Malfunction, which is triggered when the engine is started, the Engine Coolant Temperature Sensor is more than 65.4 F at startup, the engine is running at light engine load in closed loop, and the Powertrain Control Module detects that the Manifold Differential Pressure Sensor is more than 4.5v; or it detects that the MDP Sensor signal is less than 0.2v during the Comprehensive Component Monitor test. The causes of this code can range from a MDP Sensor signal circuit that is open or shorted to ground, to the PCM itself being damaged or failed. Knowing the causes and solutions to this code is essential to fixing the problem.
Causes and Solutions for Mitsubishi P1400 Code
| Cause | Solution |
|---|---|
| MDP Sensor signal circuit is open or shorted to ground | Check for open or shorts in the MDP Sensor signal circuit. |
| MDP Sensor signal circuit is shorted to VREF or system power | Check MDP Sensor signal circuit wiring, and locate the source of the short. |
| MDP Sensor is damaged or has failed | Replace the MDP Sensor. |
| PCM has failed | Replace the PCM. |
MDP Sensor Signal Circuit Problems
When diagnosing a Mitsubishi P1400 Code, the first step is to check for open or shorts in the MDP Sensor signal circuit. If the circuit is open, repair the wiring and test the system. If the circuit is shorted to ground, check the wiring and locate the source of the short.
MDP Sensor Problems
The next step is to check the MDP Sensor itself. If the MDP Sensor is damaged or has failed, it will need to be replaced. Make sure to use the correct type and brand of MDP Sensor for your car.
Powertrain Control Module Problems
In some cases, the Powertrain Control Module (PCM) may have failed or been damaged. If this is the case, the PCM will need to be replaced. Make sure to use the correct type and brand of PCM for your car.
Conclusion
When it comes to diagnosing and repairing a Mitsubishi P1400 Code, it is important to understand the definition of the code and its causes and solutions. The causes can range from a MDP Sensor signal circuit that is open or shorted to ground, to the PCM itself being damaged or failed. Knowing the causes and solutions to this code is essential to fixing the problem. By understanding and following the proper steps to diagnose and repair the Mitsubishi P1400 Code, you can get your car back on the road quickly and safely.
https://www.youtube.com/watch?v=JykWKIakebA