The MINI P2402 Code is a diagnostic trouble code that indicates that the Engine Control Module (ECM) has detected a voltage irregularity in the Leak Detection Pump (LDP) control circuit. This code is used to detect any malfunctions in the system that controls the evaporative emissions of the vehicle. The cause of this issue can be attributed to various things, such as a faulty EVAP LDP power supply circuit, a damaged EVAP LDP solenoid valve, a leak in the EVAP canister system, or an improper seal in the system. To help diagnose and resolve this issue, it is important to understand the underlying causes and potential solutions.
👀Look at this: MINI P0012 Code
Causes and Solutions for MINI P2402 Code
| Cause | Solution |
|---|---|
| EVAP LDP power supply circuit is open | Check the connections and wiring of the LDP circuit. |
| EVAP LDP solenoid valve is damaged or has failed | Replace the solenoid valve. |
| EVAP LDP canister has a leak or poor seal | Clean or replace the canister. |
| EVAP canister system has an improper seal | Check and ensure that the system is properly sealed. |
Faulty EVAP LDP Power Supply Circuit
The MINI P2402 Code is triggered when the ECM detects a voltage irregularity in the LDP control circuit. A faulty EVAP LDP power supply circuit can cause this issue. To diagnose this, it is important to check the connections and wiring of the LDP circuit. If the connections are loose or broken, the circuit cannot supply the necessary voltage to the solenoid valve.
Damaged EVAP LDP Solenoid Valve
The solenoid valve is an essential component of the EVAP system. It is responsible for controlling the flow of fuel vapors into the EVAP canister. If the solenoid valve is damaged or has failed, the ECM will detect a voltage irregularity in the LDP control circuit and set the MINI P2402 Code. To resolve this issue, the solenoid valve must be replaced.
Leak in the EVAP Canister System
The ECM will also set the MINI P2402 Code if it detects a leak in the EVAP canister system. If the canister has a leak or a poor seal, the fuel vapors will not be able to flow correctly, resulting in an irregular voltage reading. To resolve this issue, the canister must be cleaned or replaced.
👀Look at this: MINI P0262 Code
Improper Seal in the System
If the system has an improper seal, it cannot control the flow of fuel vapors correctly. This will result in an irregular voltage reading, triggering the MINI P2402 Code. It is important to check and ensure the system is properly sealed to diagnose this issue.
Conclusion
The MINI P2402 Code indicates that the ECM has detected a voltage irregularity in the Leak Detection Pump (LDP) control circuit. Various things, such as a faulty EVAP LDP power supply circuit, a damaged EVAP LDP solenoid valve, a leak in the EVAP canister system, or an improper seal, can cause this issue. It is important to understand the underlying causes and potential solutions to diagnose and resolve this issue. Following the solutions outlined in this article, you can help ensure that your vehicle is running properly and that the MINI P2402 Code is properly resolved.