Hyundai P1372 Code

If you own a Hyundai and are experiencing problems with the P1372 Code, you may wonder what is causing the issue and what solutions are available. The P1372 Code is a common problem related to the PCM Segment Time Acquisition Incorrect. Several possible causes of this code include a target wheel in the crankshaft being installed incorrectly, the CKP sensor signal being erratic or invalid, or the CKP sensor signal being open or grounded. To troubleshoot the P1372 Code and determine the best solution, it is important to understand the causes and potential solutions.

šŸ’„See also:Ā Hyundai P0447 Code

Causes and Solutions for Hyundai P1372 Code

Cause Solution
The target wheel in the crankshaft was installed incorrectly Reinstall the target wheel in the crankshaft correctly
CKP sensor signal erratic or invalid Check the CKP sensor for damage
CKP sensor signal circuit open or grounded (intermittent fault) Replace the CKP sensor and its wiring
PCM Segment Time Acquisition Incorrect Reprogram the PCM with updated software

If you own a Hyundai, you may have encountered the P1372 Code, a common problem related to the PCM Segment Time Acquisition Incorrect. This code can be troublesome to troubleshoot and resolve, as multiple potential causes exist. These causes range from a target wheel in the crankshaft installed incorrectly to a CKP sensor signal being erratic or invalid. To help our readers, we have compiled a table of common causes and their potential solutions. By understanding the causes and possible solutions, you can better troubleshoot and resolve the P1372 Code.

The Target Wheel in the Crankshaft was Installed Incorrectly

One of the most common causes of the P1372 Code is a target wheel in the crankshaft being installed incorrectly. If this is the case, reinstalling the target wheel correctly is the best solution. This may require disassembling the crankshaft and retightening the wheel.

CKP Sensor Signal Erratic or Invalid

Another common cause of the P1372 Code is erratic or invalid CKP sensor signal. If this is the case, the best solution is to check the CKP sensor for damage. If the sensor is found to be damaged, it should be replaced with a new one.

šŸ“¢Read also:Ā Hyundai P1167 Code

CKP Sensor Signal Circuit Open or Grounded

If the CKP sensor signal circuit is found to be open or grounded, it is likely an intermittent fault. In this case, replacing the CKP sensor and wiring is the best solution. It is important to check the wiring for any signs of wear and tear, as this may indicate a potential fault.

PCM Segment Time Acquisition Incorrect

The final common cause of the P1372 Code is a PCM Segment Time Acquisition Incorrect. If this is the case, reprograming the PCM with updated software is the best solution. This may require a professional to complete the task, as the process may be complex.

Conclusion

The Hyundai P1372 Code is a common problem that can cause various issues with your vehicle. By understanding the potential causes and solutions, you can better troubleshoot and resolve the issue. Common causes include a target wheel in the crankshaft being installed incorrectly, a CKP sensor signal being erratic or invalid, or the CKP sensor signal circuit being open or grounded. The solutions to these common causes range from reinstalling the target wheel, correctly checking the CKP sensor for damage, and replacing both the CKP sensor and its wiring. Finally, if the PCM Segment Time Acquisition is Incorrect, the best solution is to reprogram the PCM with updated software. By understanding the causes and potential solutions of the Hyundai P1372 Code, you can diagnose and resolve the issue quickly and effectively.

šŸš€Recommended article:Ā Hyundai P0076 Code

Rate this post

Leave a Comment