When troubleshooting a FIAT vehicle, a P0708 code may be found. FIAT P0708 code indicates a problem with the Transmission Range Sensor A Circuit. The Transmission Control Module (TCM) does not detect the selection of the automatic transmission selector when the vehicle exceeds a speed of 30 km/h (19 mph). It is important to properly diagnose and repair this code to keep the car running and functioning properly. In this article, we will discuss the causes and solutions for the FIAT P0708 code.
🎯Suggested article: FIAT P2299 Code
Causes and Solutions for the FIAT P0708 Code
| Cause | Solution |
|---|---|
| Malfunction of TCM Terminals or Connector | Check the terminals and connector for any signs of damage and replace if necessary. |
| Malfunction of Transmission Range Switch Terminals or Connector | Inspect for any signs of damage and replace if needed. |
| Malfunction of Transmission Range Switch | Replace the transmission range switch. |
| Incorrect Transmission Range Switch Adjustment | Adjust the transmission range switch to the correct settings. |
| Open Circuit on the Wiring | Check the wiring between terminals and replace if needed. |
| Fault of TCM | Replace the TCM. |
Malfunction of TCM Terminals or Connector
When the FIAT P0708 code is present, it is important to inspect the terminals and connectors of the TCM for any signs of damage or malfunction. If there are any signs of wear or tear, the airports and connector should be replaced to ensure proper functioning.
Malfunction of Transmission Range Switch Terminals or Connector
The Transmission Range Switch Terminals or Connector may also malfunction, leading to the FIAT P0708 code. It is important to inspect for any signs of damage or malfunction and replace them if needed.
🚨You may be interested in: FIAT P0340 Code
Malfunction of Transmission Range Switch
The Transmission Range Switch may malfunction, leading to the FIAT P0708 code. If this is the case, it is important to replace the transmission range switch to ensure proper functioning.
Incorrect Transmission Range Switch Adjustment
The Transmission Range Switch may be incorrectly adjusted, leading to the FIAT P0708 code. If this is the case, it is important to change the transmission range switch to the correct settings to ensure proper functioning.
Open Circuit on the Wiring
The wiring between terminals may have an open circuit, leading to the FIAT P0708 code. It is important to check the wiring between terminals and replace it if needed.
Fault of TCM
The fault of the TCM may also lead to the FIAT P0708 code. If this is the case, it is important to replace the TCM to ensure proper functioning.
👀Look at this: FIAT P1185 Code
Conclusion
In conclusion, the FIAT P0708 code indicates a problem with the Transmission Range Sensor A Circuit. To ensure proper vehicle functioning, it is important to diagnose and repair the code properly. The causes and solutions for the FIAT P0708 code include malfunction of TCM Terminals or Connector, Malfunction of Transmission Range Switch Terminals or Connector, Malfunction of Transmission Range Switch, Incorrect Transmission Range Switch Adjustment, Open Circuit on the Wiring, and Fault of TCM. With all these causes and solutions in mind, it is possible to properly diagnose and repair the FIAT P0708 Code and keep the vehicle running and functioning properly.