The FIAT P0513 Code is an error code that indicates an invalid Secret Key has been detected by the Powertrain Control Module (PCM). This error code can be caused by an incorrect VIN programmed in the PCM, an incorrect ignition key, or an issue with the PCM itself. Understanding the causes and solutions to this
When your FIAT vehicle experiences a P1128 code, it is an indication that the closed loop fueling system has not been achieved. This code is triggered when the fuel control system fails to switch from open loop to closed loop control within the calibrated time. There are a variety of potential causes for FIAT P1128
When it comes to diagnosing and fixing a FIAT P0441 Code, the process can be daunting and time consuming. The FIAT P0441 Code stands for Evaporative System Performance, and the Powertrain Control Module (PCM) monitors the Evaporative Emission System operation to ensure the system is not leaking and that it is able to get fuel
The FIAT B1017-15 code is a diagnostic trouble code (DTC) associated with the Central High Mounted Stop Light Circuit. The code occurs when the Body Control Module (BCM) detects an issue with the Stop Lamp Switch, the output circuits for the Left and Right Tail Lamp Assemblies, or the CHMSL. Common causes for the code
The FIAT U0100 Code is an error that can signal a communication issue between the engine control module (ECM) and the instrument panel cluster (IPC). This code indicates many potential problems that can cause serious damage if not addressed promptly. This article will look at the causes of the FIAT U0100 Code and the solutions
Having an engine code of FIAT P106A can be quite problematic. It often indicates an issue with the Multi-Air variable intake valve phase and lift system, an electronically controlled system. This system is much different from conventional intake valve phase and lift systems, as it uses an electronically controlled hydraulic link between the camshaft and
When a FIAT P1037 code is set, it indicates a fault in the cylinder one oil supply solenoid valve driver. The code indicates a malfunction with the Multi-Air system, an electronically controlled variable intake valve phase and lift system. This system allows each intake valve to be owned independently and infinitely, allowing for a more
When dealing with a FIAT P0038 code, it is important to understand the underlying causes and potential solutions to this problem. The FIAT P0038 code is a diagnostic trouble code that indicates a malfunction in the upstream Oxygen Sensor. This code is typically triggered by an electrical issue that is preventing the oxygen sensor from
When troubleshooting a FIAT vehicle, a P0708 code may be found. FIAT P0708 code indicates a problem with the Transmission Range Sensor A Circuit. The Transmission Control Module (TCM) does not detect the selection of the automatic transmission selector when the vehicle exceeds a speed of 30 km/h (19 mph). It is important to properly
When diagnosing and repairing a vehicle, the FIAT P2299 code is one of the most common codes a mechanic may encounter. This code is used to indicate a problem with the Brake Pedal Position-Accelerator Pedal Position Incompatible, which can be caused by a variety of different issues. This code can cause temporary and permanent issues,
The FIAT P0340 Code is a frequent issue that often appears in vehicles of this make and model and can be quite a nuisance. This code is related to the Camshaft Position Sensor circuit and is used by the Powertrain Control Module (PCM) to identify the camshaft’s relative position to the crankshaft. To help understand