The RAM P0708 code is a trouble code that is often seen in RAM vehicles. This code is typically associated with the transmission range sensor A circuit, which is responsible for detecting the current gear position and communicating this information to the transmission control module (TCM). When all the switches of the transmission range switch (TRS) are closed, this code is triggered and the driver is informed of a potential transmission problem. In order to identify the cause of the RAM P0708 code, there are a variety of potential causes that must be considered, such as a shift cable bracket or bolt that may be loose, a shift cable adjustment, or a TRS sense circuit that may be open, shorted to ground, or shorted to voltage.
Causes and Solutions for RAM P0708 Code
| Cause | Solution |
|---|---|
| Shift Cable Bracket or Bolts Loose | Tighten the bracket or bolts securely in place. |
| Shift Cable Adjustment | Adjust the shift cable to the correct position. |
| TRS Adjustment | Adjust the TRS to the correct position. |
| TRS Signal Circuit Open | Repair or replace the open circuit. |
Shift Cable Bracket or Bolts Loose
The RAM P0708 code is often caused by a shift cable bracket or bolts that are loose. This can cause the shift cable to not be in the correct position and the TRS to not detect the current gear position. The driver should inspect the bracket or bolts for any looseness and tighten them securely in place.
Shift Cable Adjustment
In some cases, the RAM P0708 code may be caused by a shift cable that is not in the proper position. This can be caused by the cable being stretched or by the cable not being adjusted correctly. The driver should adjust the shift cable to the correct position to ensure that the TRS is able to detect the current gear position.
TRS Adjustment
If the shift cable is adjusted correctly but the RAM P0708 code is still present, the TRS may need to be adjusted. The TRS should be adjusted to the correct position in order to ensure that the TRS is able to detect the current gear position.
TRS Signal Circuit Open
In some cases, the RAM P0708 code may be caused by an open TRS signal circuit. This can be caused by a faulty connection, a broken wire, or a faulty component in the circuit. The driver should inspect the circuit for any open circuits and repair or replace them as needed.
Conclusion
The RAM P0708 code is often associated with the transmission range sensor A circuit. If this code is triggered, it is important to identify the cause in order to repair the problem. There are a variety of potential causes for the RAM P0708 code, such as a shift cable bracket or bolts that may be loose, a shift cable adjustment, or a TRS sense circuit that may be open, shorted to ground, or shorted to voltage. By understanding the potential causes and solutions for the RAM P0708 code, drivers can confidently identify and repair the issue. Be sure to check the transmission range sensor A circuit if you experience the RAM P0708 code.
https://www.youtube.com/watch?v=lajIc9ZIr64