When your Nissan vehicle is displaying a P1147 code, it is likely that the vehicle’s Powertrain Control Module (PCM) has detected a problem with the HO2S-12 (Bank 1 Sensor 2) Rich Shift Monitoring (Bank 1). This code indicates that the PCM has failed to reach the minimum and maximum voltages of the HO2S-12 signal circuit during the Continuous Cycle Monitor (CCM) test period, meaning the vehicle was driven at over 48 mph for 2 minutes. To fix this issue, it is important to consider the causes, which can range from excessive fuel pressure to a faulty fuel injector or a damaged HO2S assembly. Below is a table of potential causes and solutions for the Nissan P1147 code.
Causes and Solutions for Nissan P1147 Code
| Cause | Solution |
|---|---|
| Fuel pressure is excessively high (rich air fuel) | Check fuel pressure and adjust as needed |
| Fuel injector sticking open (one or more has a mechanical fault) | Check for sticking injectors and replace any damaged injectors |
| HO2S assembly is damaged or has failed | Replace the HO2S assembly |
| HO2S heater assembly is damaged or has failed | Replace the HO2S heater assembly |
If your Nissan vehicle is displaying a P1147 code, it is important to understand what this code means and the potential causes that could be causing the issue. The P1147 code is an indication that the Powertrain Control Module (PCM) has detected a problem with the HO2S-12 (Bank 1 Sensor 2) Rich Shift Monitoring (Bank 1). This code occurs when the PCM fails to reach the minimum and maximum voltages of the HO2S-12 signal circuit during the Continuous Cycle Monitor (CCM) test period, meaning the vehicle was driven at over 48 mph for 2 minutes. Potential causes for the P1147 code include excessive fuel pressure, a faulty fuel injector, or a damaged HO2S assembly. To make sure that the issue is resolved, it is important to consider the causes and the potential solutions associated with the P1147 code.
Excessive Fuel Pressure
If the fuel pressure is excessively high, it can result in a rich air fuel mixture. This can cause the P1147 code to appear on the Nissan vehicle. To fix this issue, it is important to check the fuel pressure and adjust it as needed.
Sticking Fuel Injector
A sticking fuel injector can cause the P1147 code to appear on the Nissan vehicle. To fix this issue, it is important to check for sticking injectors and replace any damaged injectors that are found.
Damaged HO2S Assembly
A damaged HO2S assembly can cause the P1147 code to appear on the Nissan vehicle. To fix this issue, it is important to replace the HO2S assembly. Additionally, the HO2S heater assembly may be damaged or have failed, which can cause the P1147 code to appear. In this case, it is important to replace the HO2S heater assembly.
Conclusion: Dealing With the Nissan P1147 Code
When your Nissan vehicle is displaying a P1147 code, it is important to understand the potential causes and solutions associated with the code. Excessive fuel pressure, a faulty fuel injector, or a damaged HO2S assembly can all cause the P1147 code to appear. To make sure that the issue is resolved, it is important to check the fuel pressure, replace any damaged injectors, and replace the HO2S assembly and heater assembly if necessary. With the right attention, the Nissan P1147 Code can be resolved quickly and reliably.
https://www.youtube.com/watch?v=KgmhjqRUT50