Drivers of Lexus vehicles may encounter an error code P1762, which is related to the governor pressure sensor offset volts being too high or low. This code is triggered when the A/T governor pressure sensor VREF (5v) circuit is open, or the governor pressure sensor ground circuit is open. It could also be caused by the P/N switch being damaged or failing to operate properly, transmission fluid having excessive debris or being contaminated, or the PCM having failed.
Causes & Solutions for Lexus P1762 Code
| Cause | Solution |
|---|---|
| Governor pressure Sensor VREF (5v) circuit is open | Check and inspect the circuit for any damage or corrosion. Replace any wiring as necessary. |
| Governor pressure Sensor ground circuit is open | Check and inspect the circuit for any damage or corrosion. Replace any wiring as necessary. |
| P/N switch is damaged or has failed (not operating properly) | Replace the P/N switch with a new one. |
| Transmission fluid has excessive debris or it is contaminated | Flush the transmission fluid, and then replace it with fresh, clean transmission fluid. |
| PCM has failed | Replace the PCM with a new one. |
When a Lexus vehicle displays an error code P1762, it is indicative of an issue within the governor pressure sensor system. This can be caused by a number of different issues, such as an open VREF (5v) circuit, an open ground circuit, a damaged or failed P/N switch, contaminated or excessive debris in the transmission fluid, or a failed PCM. Each of these issues can be addressed through a variety of solutions, ranging from inspecting and replacing wiring to replacing the P/N switch or the PCM. Taking the necessary steps to identify and resolve the underlying problem can help keep the Lexus vehicle running smoothly.
Inspecting & Replacing Wiring
When the governor pressure sensor VREF (5v) or ground circuit is open, it is important to inspect the wiring to determine if it is damaged or corroded. If the wiring is found to be damaged, it should be replaced to ensure the Lexus vehicle is running properly.
Replacing the P/N Switch
If the P/N switch is determined to be damaged or not operating properly, it should be replaced with a new one. This is important for ensuring that the vehicle is functioning properly and avoiding any potential safety issues.
Flushing the Transmission Fluid
When the transmission fluid is contaminated or contains excessive debris, it should be flushed and replaced with fresh, clean transmission fluid. This will help keep the transmission system running smoothly and avoid any potential damage or malfunctioning.
Replacing the PCM
If the PCM has failed, it should be replaced with a new one. This is necessary for ensuring that all systems are working properly and avoiding any potential safety issues.
Conclusion
When a Lexus vehicle displays an error code P1762, it is important to take the necessary steps to identify and resolve the underlying issue. This can include inspecting and replacing wiring, replacing the P/N switch, flushing the transmission fluid, or replacing the PCM. Taking the appropriate measures to address the problem can help keep the Lexus vehicle running smoothly and avoid any potential safety hazards.
https://www.youtube.com/watch?v=p0wF7iHWIAk