The Jeep P0935 Code is a diagnostic code for an issue in the vehicle’s transmission system. It is triggered when the pressure sensor detects an electrical failure within the oil pressure sensor circuit. This code is generated when the pressure sensor measures the oil pressure which actuates both dog clutches and compares the sensor voltage to calibrated thresholds. It is important to identify and resolve the cause of this code as soon as possible in order to ensure a safe and efficient running of the vehicle.
Causes and Solutions of Jeep P0935 Code
| Cause | Solution |
|---|---|
| Oil Pressure Signal Circuit Shorted to Voltage | Check the wiring for any damage or corrosion. Replace affected parts. |
| Sensor Ground Circuit Open | Check and clean the ground wires and connectors. Replace any damaged parts. |
| Transmission Oil Pressure Sensor | Replace the faulty sensor. |
| Transmission Control Module (TCM) | Replace the TCM if it is faulty. |
Oil Pressure Signal Circuit Shorted to Voltage
When the oil pressure signal circuit is shorted to voltage, it means that the voltage is higher than what it should be in the circuit. This can be caused by a wiring problem or a faulty component. To diagnose this issue, you should check the wiring for any damage or corrosion. If any parts are damaged or corroded, they should be replaced immediately.
Sensor Ground Circuit Open
Another common cause of the Jeep P0935 Code is an open sensor ground circuit. This can be caused by faulty connectors, corroded ground wires, or damaged parts. To diagnose this issue, you should check and clean the ground wires and connectors. If any parts are damaged or corroded, they should be replaced immediately.
Transmission Oil Pressure Sensor
The transmission oil pressure sensor is responsible for measuring the pressure of the oil in the transmission system. If this sensor is faulty, it can cause the Jeep P0935 Code to be triggered. To fix this issue, the faulty sensor should be replaced with a new one.
Transmission Control Module (TCM)
The transmission control module (TCM) is responsible for controlling the transmission system. If the TCM is faulty, it can cause the Jeep P0935 Code to be triggered. To fix this issue, the TCM should be replaced with a new one.
Conclusion
The Jeep P0935 Code is a diagnostic code for an issue in the vehicle’s transmission system. It is important to identify and resolve the cause of this code as soon as possible in order to ensure a safe and efficient running of the vehicle. The most common causes of the Jeep P0935 Code are a shorted oil pressure signal circuit, an open sensor ground circuit, a faulty transmission oil pressure sensor, and a faulty transmission control module. The solutions for these causes range from checking and replacing wiring and components to replacing the faulty sensor or TCM.
https://www.youtube.com/watch?v=oLYdCd6lyHY