If you own a Hyundai, you may have seen a P0326 code. This code is a signal that the Knock Sensor Circuit Malfunction (Bank 1) has been detected by the ECM/PCM. This means that when the engine speed is between 1000-2200 rpm, the ECT sensor signal is more than 104°F, and the engine load is more than 2 ms, the ECM/PCM detected the Knock sensor signal was out of range at a calculated engine speed. This P0326 code can be caused by a number of things, such as a knock sensor signal circuit being open or shorted to ground, shorted to VREF or system power, or the knock sensor or ECM/PCM being damaged or having failed. Below is a table of potential causes and their respective solutions for the Hyundai P0326 code.
Potential Causes and Solutions for the Hyundai P0326 Code
| Cause | Solution |
|---|---|
| Knock sensor signal circuit open or shorted to ground | Inspect the knock sensor circuit wiring, repair or replace as needed. |
| Knock sensor signal circuit shorted to VREF or system power | Check the wiring for any shorts or breaks, repair or replace as needed. |
| Knock sensor is damaged or has failed | Replace the knock sensor. |
| ECM/PCM has failed | Replace the ECM/PCM. |
Having a Hyundai can be a great experience, but it can also be stressful when your vehicle’s ECM/PCM detects the P0326 code. This code indicates that the Knock Sensor Circuit Malfunction (Bank 1) has been detected and requires immediate attention. Fortunately, there are a number of potential causes that can result in the P0326 code, and a variety of solutions to resolve the issue. This article will provide an overview of the possible causes and solutions for the Hyundai P0326 code.
Knock Sensor Signal Circuit Open or Shorted to Ground
If the ECM/PCM detects an open or shorted to ground condition in the knock sensor signal circuit, it will trigger the P0326 code. In this case, you should inspect the knock sensor circuit wiring and repair or replace any faulty components.
Knock Sensor Signal Circuit Shorted to VREF or System Power
If the ECM/PCM detects a short to VREF or system power in the knock sensor signal circuit, it will set the P0326 code. To resolve this issue, you should check the wiring for any shorts or breaks and repair or replace any faulty components.
Knock Sensor is Damaged or has Failed
If the knock sensor is damaged or has failed, it can cause the P0326 code to be set. To fix this issue, you should replace the knock sensor.
ECM/PCM has Failed
If the ECM/PCM has failed, it can cause the P0326 code. To resolve this issue, you should replace the ECM/PCM.
Conclusion
The Hyundai P0326 code indicates that the Knock Sensor Circuit Malfunction (Bank 1) has been detected by the ECM/PCM. There are a number of potential causes that can result in the P0326 code, including an open or shorted to ground condition in the knock sensor signal circuit, a short to VREF or system power in the knock sensor signal circuit, a damaged or failed knock sensor, or a failed ECM/PCM. By understanding the potential causes and solutions for the Hyundai P0326 code, you can quickly diagnose and resolve any issues related to this code.
https://www.youtube.com/watch?v=FO7WhhrUGnE