When it comes to Hyundai vehicles, the P0106 Code can be a cause of great distress and frustration. This code points to an issue with the Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance, and often results from a poor connection, open or short in the MAP sensor circuit, faulty MAPS, and/or faulty ECM. To best diagnose and rectify the issue, there are two Service Bulletins released by the National Highway Traffic Safety Administration (NHTSA) that can provide helpful information.
Causes and Solutions for Hyundai P0106 Code
| Cause | Solution |
|---|---|
| Poor connection | Check all wiring and connections |
| Open or short in MAP sensor circuit | Check all wiring and connections |
| Faulty MAPS | Replace faulty MAPS |
| Faulty ECM | Replace faulty ECM |
Checking Wiring and Connections
When the Hyundai P0106 Code is seen, the first step to take is to check all wiring and connections. Any open or short in the MAP sensor circuit should be addressed. Additionally, any poor connections should be tightened to avoid any intermittent issues.
Replacing Faulty MAPS
If the wiring and connections are all in order, the next step is to inspect the MAPS. Often, the MAPS can be faulty and need to be replaced. This will require a professional with the right knowledge and experience to do so.
Replacing Faulty ECM
In some cases, the ECM itself may be the cause of the P0106 Code. This could be due to a failed component, or simply age-related wear and tear. If this is the case, then the ECM will need to be replaced, as this is the only way to fix the problem.
Conclusion
The Hyundai P0106 Code can be a cause of great distress for owners of Hyundai vehicles. To diagnose and fix the issue, there are two Service Bulletins released by the NHTSA that can provide helpful information. This includes checking all wiring and connections, replacing faulty MAPS, and replacing faulty ECM. By following these steps, Hyundai owners can get back on the road with peace of mind.
https://www.youtube.com/watch?v=IF-4GLKtlzM