The Ford U3013:16 Code is an error code that indicates a Control Module Input Power “C” Circuit Voltage Below Threshold. This type of error is caused by the BCM detecting lower than expected battery voltage on the voltage supply input circuit. It is a continuous DTC that sets in the BCM and can be a difficult problem to fix if not properly diagnosed. Fortunately, there are solutions available to address this type of error code and get your vehicle back on the road. In order to help you better understand the Ford U3013:16 Code, we have created a table to outline the causes and solutions of this error code.
Causes and Solutions of Ford U3013:16 Code
| Cause | Solution |
|---|---|
| The BCM detecting lower than expected battery voltage on the voltage supply input circuit | Check the battery voltage and charging system for any signs of failure |
| Faulty wiring, connectors, relays, or switches | Inspect the wiring and connectors for any signs of corrosion, damage, or loose connections |
| Faulty control module | Replace the control module with a new one |
| Faulty BCM | Replace the BCM with a new one |
The Ford U3013:16 Code is an important error code to be aware of, as it can be caused by a variety of issues. Understanding the causes and solutions of this code can help you diagnose and repair the problem quickly. This error code is triggered when the BCM detects lower than expected battery voltage on the voltage supply input circuit. This can be caused by faulty wiring, connectors, relays, or switches, a faulty control module, or a faulty BCM. Fortunately, there are solutions available to address this type of error code and get your vehicle back on the road. All of these causes and solutions are outlined in the table above.
Check the Battery Voltage and Charging System
One of the most common causes of the Ford U3013:16 Code is the BCM detecting lower than expected battery voltage on the voltage supply input circuit. This can be addressed by checking the battery voltage and charging system for any signs of failure. If the battery voltage is low, it is recommended to charge the battery and check for any signs of corrosion, damage, or loose connections in the wiring and connectors.
Replace the Control Module or BCM
If the battery voltage and charging system are in good condition, it is likely that the problem is caused by a faulty control module or BCM. In this case, it is recommended to replace the control module or BCM with a new one. This is usually a straightforward process and can easily be done by a qualified mechanic.
Conclusion
The Ford U3013:16 Code is an important error code to be aware of, as it can indicate a variety of issues. By understanding the causes and solutions of this code, you can quickly diagnose and repair the problem and get your vehicle back on the road. Solutions to the Ford U3013:16 Code can include checking the battery voltage and charging system, or replacing the control module or BCM with a new one. By following these solutions, you can effectively address the Ford U3013:16 Code and keep your vehicle running in optimal condition.
https://www.youtube.com/watch?v=Zh3xEG2UYBQ