When it comes to diagnosing and repairing a Chrysler P0735 Code, it’s essential to have a good understanding of the causes and solutions. This code indicates a gear ratio error in the fifth gear, and it is triggered when the transmission control system detects a discrepancy between the expected gear ratio and the actual gear ratio. There are several potential causes for this issue, ranging from related transmission diagnostic codes to internal transmission problems. Fortunately, there are also numerous solutions available to address the issue. To help you understand the causes and solutions for the Chrysler P0735 Code, below is a table outlining the different culprits and their associated remedies.
Causes and Solutions for Chrysler P0735 Code
| Cause | Solution |
|---|---|
| Related Transmission DTCs Present | Diagnose and repair the related DTCs before proceeding |
| Intermittent Gear Ratio Errors | Check the transmission for debris and replace the fluid and filter |
| Transmission Solenoid/Pressure Switch Assembly | Replace the faulty component |
| Internal Transmission | Rebuild or replace the transmission |
When the Chrysler P0735 Code is triggered, it’s important to check for any related diagnostic trouble codes (DTCs) that may be present. If any related DTCs are present, they should be diagnosed and repaired before proceeding. If the related DTCs are not addressed, it is likely that the Chrysler P0735 Code will continue to be triggered, causing the transmission to operate in a manner that is less than optimal.
Intermittent Gear Ratio Errors
In some cases, the Chrysler P0735 Code is triggered due to intermittent gear ratio errors. When this occurs, it is important to inspect the transmission for any debris that may be present. If debris is found, it can be removed and the transmission fluid and filter can be replaced. In some cases, this may resolve the issue.
Transmission Solenoid/Pressure Switch Assembly
The transmission solenoid/pressure switch assembly is responsible for controlling the gear ratio of the transmission. If this component is faulty, it may cause the Chrysler P0735 Code to be triggered. In this case, the faulty component should be replaced to resolve the issue.
Internal Transmission
In some cases, the internal components of the transmission may be damaged or worn. If this is the case, it may be necessary to rebuild or replace the transmission in order to resolve the issue.
Conclusion
In conclusion, the Chrysler P0735 Code is a gear ratio error code that is triggered when there is a discrepancy between the expected gear ratio and the actual gear ratio. There are several potential causes for this issue, ranging from related transmission diagnostic codes to internal transmission problems. Fortunately, there are also numerous solutions available to address the issue. By understanding the causes and solutions for the Chrysler P0735 Code, you can ensure that the issue is properly diagnosed and repaired.
https://www.youtube.com/watch?v=bnMEQJuZbxs