Toyota P1351 Code

When your Toyota vehicle throws the P1351 code, it is because the VVT (Variable Valve Timing) Sensor/Camshaft Position Sensor on Bank 2 has a range or performance problem. This code is commonly caused by a mechanical system malfunction, such as jumping teeth on the timing belt or a belt that is too stretched. It could also be the result of a malfunctioning ECM. To fix the problem and get your Toyota running smoothly again, it is important to identify the cause and then take the necessary steps to resolve it. In this article, we will explore the causes and solutions to the Toyota P1351 code.

Inspection of Timing Belt

The first step to identify the cause of the Toyota P1351 code is to inspect the timing belt. It could be that the belt has jumped a tooth, or that it is too stretched. If this is the case, the belt will need to be replaced. It is important to make sure that the timing belt is installed correctly and not too tight or too loose.

Replace ECM or VVT Sensor (Bank 2)

If the timing belt is not the cause of the problem, then the next step is to replace the ECM or the VVT Sensor (Bank 2). The ECM, or Engine Control Module, controls the operation of the engine, and if it is malfunctioning, it can cause the P1351 code. The VVT Sensor (Bank 2) is responsible for monitoring the position of the camshafts and sending this information to the ECM. If this sensor is malfunctioning, it can also cause the P1351 code.

Conclusion

When your Toyota throws the P1351 code, it is important to identify the cause and take the necessary steps to resolve the issue. The most common causes are a malfunctioning timing belt, ECM, or VVT Sensor (Bank 2). To fix the problem and get your Toyota running smoothly again, it is important to inspect the timing belt and replace the ECM or VVT Sensor (Bank 2) if necessary. By taking these steps, you can ensure that your Toyota will be running smoothly and code free with the Toyota P1351 Code.

https://www.youtube.com/watch?v=DKe9I7VdfWE