The Chrysler P0440 Code is an indication that the Evaporative Emission System (ESIM) is not functioning properly. This code will appear when there is a malfunction in the system that causes the pressure or vacuum to drop below the threshold of +1 inch of water and -2 inches of water. The system consists of two weighted seals, a vacuum actuated switch, and a Powertrain Control Module (PCM). It is important to diagnose and repair the system as soon as this code appears, as it can lead to further issues with the vehicle’s emissions. In this article, we will discuss the common causes and solutions of the Chrysler P0440 Code.
Common Causes and Solutions for Chrysler P0440 Code
| Cause | Solution |
|---|---|
| EVAP PURGE SOLENOID VACUUM SUPPLY | Check the solenoid for proper operation and replace if needed. |
| EVAP PURGE TUBE OBSTRUCTION | Clean or replace the tube if necessary. |
| OBSTRUCTION IN THE VENT HOSE OR FILTER | Clean or replace the hose or filter if needed. |
| ESIM SIGNAL CIRCUIT OPEN | Check and repair the circuit if needed. |
EVAP Purge Solenoid Vacuum Supply
The EVAP Purge Solenoid is a device that is intended to regulate the flow of fuel vapors from the fuel tank to the engine. If the solenoid is not working properly, it can cause the Chrysler P0440 Code to be triggered. The best way to diagnose this issue is to check the solenoid for proper operation. If the solenoid is not functioning properly, it should be replaced.
EVAP Purge Tube Obstruction
The EVAP Purge Tube is a device that is intended to regulate the flow of fuel vapors from the fuel tank to the engine. If the tube is blocked, it can cause the Chrysler P0440 Code to be triggered. The best way to diagnose this issue is to inspect the tube for any obstructions. If there is an obstruction, it should be cleaned or replaced as necessary.
Obstruction in the Vent Hose or Filter
The Vent Hose or Filter is a device that is intended to regulate the flow of fuel vapors from the fuel tank to the engine. If there is an obstruction in the hose or filter, it can cause the Chrysler P0440 Code to be triggered. The best way to diagnose this issue is to inspect the hose or filter for any obstructions. If there is an obstruction, it should be cleaned or replaced as necessary.
ESIM Signal Circuit Open
The ESIM Signal Circuit is a device that is intended to regulate the flow of fuel vapors from the fuel tank to the engine. If the circuit is open, it can cause the Chrysler P0440 Code to be triggered. The best way to diagnose this issue is to inspect the circuit for any open connections. If there is an open connection, it should be repaired as necessary.
Conclusion
In conclusion, the Chrysler P0440 Code can be triggered by a number of different issues, such as an EVAP Purge Solenoid Vacuum Supply malfunction, an EVAP Purge Tube obstruction, an obstruction in the Vent Hose or Filter, or an ESIM Signal Circuit open. It is important to diagnose and repair the system as soon as this code appears, as it can lead to further issues with the vehicle’s emissions. By following the steps outlined in this article, you can diagnose and repair the Chrysler P0440 Code quickly and efficiently.
https://www.youtube.com/watch?v=ilMPNLpKBLg