When it comes to the Dodge P1797 Code, this is an error code that refers to the transmission overheating. This code is triggered when the transmission is in the AutoStick® mode and the torque converter slips due to aggressive driving or heavy loading conditions. The Manual Shift Overheat DTC is set when the transmission or engine temperature approaches an overheat condition and the AutoStick® mode is temporarily suspended until the temperature returns to normal. To ensure that your Dodge is running safely and efficiently, it is important to identify and address the causes and solutions for this error code.
Causes and Solutions for Dodge P1797 Code
| Cause | Solution |
|---|---|
| Torque converter slip during aggressive driving or heavy loading conditions | Reduce the amount of aggressive driving and heavy loading |
| Internal controller logic prevents the transmission from overheating | Use diagnostic tools to adjust the controller logic |
| Manual Shift Overheat DTC sets | Check for any transmission fluid leaks and repair if necessary |
| AutoStick® mode is temporarily suspended | Utilize the diagnostic tools to reset the AutoStick® mode |
Torque Converter Slip
The Dodge P1797 Code is triggered when the torque converter slips due to aggressive driving or heavy loading conditions. This slip may cause a drop in engine power, which affects the performance of the transmission. To reduce the chances of this code appearing, it is best to reduce the amount of aggressive driving and heavy loading.
Internal Controller Logic
If the internal controller logic is preventing the transmission from overheating, then it is necessary to use diagnostic tools to adjust this logic. This can help to ensure that the transmission is running at a safe and efficient temperature.
Manual Shift Overheat DTC
The Manual Shift Overheat DTC is set when the transmission or engine temperature approaches an overheat condition and the AutoStick® mode is temporarily suspended. To prevent this code from appearing, it is important to check for any transmission fluid leaks and repair them if necessary.
Resetting the AutoStick® Mode
When the AutoStick® mode is temporarily suspended, it is necessary to utilize the diagnostic tools to reset this mode. This can help to ensure that the transmission is running at the most efficient temperature and with the correct amount of power.
Conclusion
The Dodge P1797 Code is an error code that is triggered when the torque converter slips due to aggressive driving or heavy loading conditions. To ensure that your Dodge is running safely and efficiently, it is important to identify and address the causes and solutions for this error code. The most important solutions are to reduce the amount of aggressive driving and heavy loading, use diagnostic tools to adjust the controller logic, check for any transmission fluid leaks and repair them if necessary, and utilize the diagnostic tools to reset the AutoStick® mode. By taking all of these steps, you can ensure that your Dodge is running properly and without the Dodge P1797 Code.
https://www.youtube.com/watch?v=fLfbiuVRyKA